CITY OF SANTEE - DEPARTMENT OF DEVELOPMENT SERVICES - PLOT PLAN CHECK - Form and Standard

Oct 29, 2026

Upload by Jasmine

Plot plan review checklist for the City of Santee, Department of Development Services, specifying preliminary and detailed compliance items. It covers completeness of design, required horizontal/vertical control references, submission quantity, and conformance with tentative map and permit conditions. It also details drawing standards including title sheets, ink and line requirements, sheet numbering, scale, north arrow/graphic scale, engineer seals, and required cover sheet maps, certifications, parcel information, zoning and land use, plus plan sheet content for boundaries, easements, building layout, site layout, contours, grading, drainage, and utilities.

LanguageEnglish

CategoryResearch & Report

FormatPDF

Pages9

Reading Time23 min

AccessFree to download

PLOT PLAN CHECK

I. PRELIMINARY CHECK

II. DETAILED CHECK

A. GENERAL

B. COVER SHEET

C. DETAIL SHEETS

D. PLOT PLAN SHEETS

CITY OF SANTEE-DEPARTMENT OF DEVELOPMENT SERVICES PLOT PLAN CHECK I. PRELIMINARY CHECK-Plans shall conform to the following: A. Design is/is not substantially complete. B. Horizontal and vertical control from ROS 11252. C. Correct number of plans are submitted and if other than first submittal, check prints are returned with the submittal. D. Tentative Map and Plot Plan: Typical section, street layout, other: E. Compliance with Tentative Map and Plot Plan conditions of approval: F. Compliance with Development Review Permit or Conditional Use Permit conditions of approval: G. Comments: II. DETAILED CHECK-Form and Standard A. GENERAL 1. Drawing requirements. (a) Prepared on standard City of Santee title sheets. (b) Black permanent ink on mylar (3 mil minimum) . (c) Lettering is a minimum of 0. 10" for mechanical lettering or 0. 12" for free-hand lettering. (d) Line weight is a minimum of "OO" for existing conditions anda minimum of "O" for proposed improvements. (e) Sheets numbered consecutively with total number of sheets in the plan set indicated. (f) Title block on each sheet titled: (1) Plot Plan for (2) Project title or name (3) City of Santee tentative map or parcel number. (g) Bench mark description and datum reference on each sheet. Bench mark must be from ROS 11252 and shall include the station designation number in the description. (h) Scale 1" = 20'. (i) North arrow and a 4 inch graphic scale on each sheet. (j) Each sheet shall be sealed and signed by the engineer of work responsible for the plan. (k) Sheet size shall be 24" x 36". (l) It is the engineer of works responsibility that all development plans (site, improvement, landscape, plot, grading and drainage plans and elevations) are coordinated and consistent with each other. B. COVER SHEET 1. Vicinity map with north arrow and scale indicated. 2. Project title information. 3. Key map. (a) North arrow (b) Scale: 1" = 200' (c) Shows general plan of subdivision boundary, streets and lots identified (d) Shows adjacent subdivisions and connecting streets (e) Shows sheet coverage (f) Legend identifies all symbols used 4. Include notes and certifications in accordance with Attachment-A,"CITY OF SANTEE - DEPARTMENT OF DEVELOPMENT SERVICES GENERAL NOTES AND CERTIFICATIONS FOR PLOT PLANS" 5. Legend identifying all symbols used and reference to the appropriate standard. 6. Signature approval block for Department of Planning and Community Development. 7. Engineer of Work's statement, signature and seal. 8. Assessor parcel number(s) . 9. Legal description of parcel(s) . 10. Name, address and telephone number of owner. 11. Name, address and telephone number of engineer of work. 12. Include zoning classification/general plan land use classification. 13. Existing land use. 14. Proposed land use. C. DETAIL SHEETS 1. Separate detail sheets shall be provided in lieu of including details on the plan drawings. 2. Provide detail drawing of any proposed fencing. 3. Provide detail drawing of any proposed sound walls. 4. Additional details to be provided for clarity as noted during the plan check. D. PLOT PLAN SHEETS 1. Boundaries and easements. (a) Jurisdictional boundaries. (1) County-City (2) City-City (b) Subdivision or project boundaries. (c) Right of way lines. (d) Lot line dimensions. (Bearings and distances) (e) Lot lines and boundaries of adjacent properties shown. (1) Adjacent properties assessors parcel number shown. (2) Map or parcel map references shown. (f) Show and dimension all existing and proposed easements which encumber the property. Reference source document including record number and date of recording. (1) Utility easements. (2) Drainage easements. (3) Access easements. (4) Slope right easements. (5) Tree planting and maintenance easements. (6) Open space easements. 2. Building layout. (a) Show zoning set back lines. (

FAQs

What preliminary items must be verified during the plot plan check?

Confirm whether the design is substantially complete, ensure horizontal and vertical control from ROS 11252 is used, verify the correct number of plans is submitted, and include returned check prints for non-first submittals. Also verify compliance with tentative map and permit conditions of approval and review the provided comments.

What are the general drawing requirements for the plot plan set?

Use standard City of Santee title sheets, black permanent ink on mylar with the specified minimum thickness, and meeting lettering and line weight minimums. Number sheets consecutively, include required title block information on each sheet, provide benchmark descriptions from ROS 11252, set scale to 1" = 20', include north arrow and graphic scale, and ensure each sheet is sealed and signed by the responsible engineer.

What must the cover sheet include?

Provide a vicinity map with north arrow and scale, a key map showing subdivision boundaries, adjacent subdivisions and connecting streets, sheet coverage, and legends identifying symbols. Add required general notes and certifications per the referenced attachment, include symbol legends and zoning/land-use information, and provide signature approval blocks, engineer statements, parcel information, legal descriptions, and owner/engineer contact details.

Oct 29, 2026

Upload by Jasmine