CINCINNATI ARROW E/DART 500/750 (ERM) - ARROW 500/750/1000/1250C (ERM) - ARROW 1250/1500/2000 (ERD) - Vertical Machining Centers - ACCRAMATIC 2100E CNC Control - Release 3.0 - Edition 3 - January 1999

Oct 23, 2026

Upload by Levi

Operating manual for Cincinnati Machine Arrow E/Dart and Arrow series vertical machining centers configured with the ACRAMATIC 2100E CNC control (Release 3.0). Provides safety precautions, warnings, and danger notes emphasizing safe handling before operation, including protection installation requirements and cutting fluid concentration control to prevent corrosion and hazards. Includes guidance for qualified personnel, training responsibilities, and direction for questions to Field Service, with a chaptered table of contents beginning with safety and general instructions.

LanguageEnglish

CategoryTechnology

FormatPDF

Pages405

Reading Time17 h 1 min

AccessFree to download

Chapter 1 Safety Precautions

Important

General Safety Instructions And Considerations

Personal Safety

Work Area Safety

Tool Safety

Lifting And Carrying Safety

Installation And Relocation Safety

Setup And Operation Safety

Maintenance Safety

Materials Used With This Product

Lifting Devices

General

Eyebolts

Hoist Rings

Spreader Bars And Lifting Beams

Chain

Cable Slings

OPERATING MANUAL for CINCINNATI ARROW E/DART 500/750 (ERM) ARROW 500/750/1000/1250C (ERM) ARROW 1250/1500/2000 (ERD) VERTICAL MACHINING CENTERS with ACRAMATIC 2100E CNC CONTROL Release 3.0 PUBLICATION NO. 91203809--001 IMPORTANT Carefully read the instructions and safety precautions given in this manual. Do not attempt to operate this machine until you have thoroughly read and understood the material contained in this manual and all other applicable manuals. At the time of writing, the book was completely up--to--date. However, due to continual improvements in design, it is possible that descriptions contained herein may vary to a slight extent from the system delivered to you. This merely implies that the system has been improved to better fulfill your requirements. You are encouraged to contact the nearest Cincinnati Machine representative for clarification. Patents Notice The machine and attachmentsand parts thereof illustrated and described in this book are manufactured under and protected by issued and pending British and Foreign Patents and copyright is reserved in any original design feature thereof and in the contents of this book and every part thereof. Cincinnati Machine U. K. Limited P.O. Box 505, Kingsbury Road, Birmingham, B24 0QU 1998 Cincinnati Machine, a Division of UNOVA Industrial Automation Systems, Inc. Cincinnati Machine, CINCINNATI, DART, ARROW, SABRE, LANCER and HAWK are trademarks of Cincinnati Machine, a division of UNOVA Industrial Automation Systems, Inc. ACRAMATIC is a trademark of Vickers E.S. D. , Inc. Printed in England -- EDITION 3--January 1999 WARNING 1 In order to clearly show details of this machine, some covers, shields, guards, barriers, devices or doors have either been removed or shown in an”open” position. All such protective components must be installed in position before operating this machine. Failure to follow this instruction may result in personal injury. WARNING 2 CUTTING FLUIDS When soluble coolants are used, it is important to ensure that recommended concentration levels are maintained. Failure to follow this instruction can cause corrosion of safety critical parts, resulting in machine damage and/or serious personal injury. FOREWORD The purpose of this manual is to provide the necessary information to enable suitably experienced personnel, to operate the CINCINNATI MACHINE ARROW E/DART (ERM) and ARROW (ERD/ERM) Vertical Machining Centers, when fitted with ACRAMATIC A2100 control. Information contained in this manual is not warranted and is subject to change without notice. The manual has not been prepared to enable inexperienced personnel to operate the machine without further training. The owner/user is responsible for the training of inexperienced personnel and for providing the background necessary for experienced personnel to safely operate these machines. The chapter on general safety precautions should be observed at all times during machine operation and maintenance. Read this chapter before reading the remaining chapters in this manual and operating the machine. Any questions pertaining to the operation of the machine should be directed to: Field Service Department Cincinnati Machine Cincinnati Machine UK Limited, Marketing Company, P.O. Box 505, Cincinnati, Kingsbury Road, Ohio 45209--9988 Birmingham, B24 0QU USA. England Tel: 0121--351--3821 Main Tel: (513) 841--8100 Fax: 0121--313--1184 Service Tel: (513) 841 3000 Service Fax: (513) 841 8871 DANGER HIGH VOLTAGE Lethal voltages are present in the magnetics and electrical control cabinets when the MACHINE MAIN DISCONNECT is ’ON’. Current and voltage measurements should be attempted only by qualified electrical maintenance personnel. Before working on any electrical circuits, turn the machine Main Disconnect Device ’OFF’ and lock It. Capacitors in the Servo Drives require up to 20 minutes to completely discharge. Always verify

FAQs

Who should operate these Cincinnati vertical machining centers and when is training required?

The manual is intended for suitably experienced personnel. It states it is not prepared for inexperienced personnel to operate the machine without further training, and places responsibility on the owner/user to train and provide necessary background for safe operation.

What must be done before any work on electrical circuits?

Turn the machine Main Disconnect Device 'OFF' and lock it before working on electrical circuits. It also warns that lethal voltages may be present when the machine Main Disconnect is 'ON' and that only qualified electrical maintenance personnel should attempt measurements.

Why are cutting fluid concentration levels important?

When soluble coolants are used, recommended concentration levels must be maintained. Failure to do so can cause corrosion of safety-critical parts, leading to machine damage and/or serious personal injury.

Oct 23, 2026

Upload by Levi