Chain Link Fence (72 Inch High Or Less) - Specification Notes - 252

Oct 25, 2026

Chain link fencing specification for installations at 72 inches high or less, detailing required components, post construction, and accessory installation conditions. The notes define post top finials, brace spacing approximately 12 inches below terminal post tops, and approved hot-dip galvanized fitting materials. Fence selvedges must have a twisted and barbed finish, while barbed wire, extension arms, and top horizontal rails are installed only when shown on plans or requested in special provisions. Includes table data for minimum sizes and weights for ends, corners, pull posts, line posts, braces, and top rail.

LanguageEnglish

CategoryTechnology

FormatPDF

Pages1

Reading Time3 min

AccessFree to download

Chain Link Fence Specification

General Requirements and Installation Notes

Materials and Approved Components

Table I: Minimum Size and Weight

FAQs

What fence type and post system are required for this specification?

Fencing shall be chain link using galvanized chain link fabric on steel posts.

Where are braces installed and how are they spaced?

Braces are spaced approximately 12 inches below the top of terminal posts and run from end, gate, or corner posts to the first adjacent line post.

When are barbed wire, extension arms, and top horizontal rails installed?

They are installed only when shown on the plans and/or called for in the special provisions.

Oct 25, 2026

Uploaded by WPS_1786070896