CAD 1801 - Aircraft Maintenance Licence - CAAM Part 66 - Issue 1 - Revision 0 - 1 st May 2021

Oct 1, 2026

Upload by asda1da

CAD 1801 - Aircraft Maintenance Licence (CAAM Part 66) sets out requirements for the issuance, renewal and variation of an Aircraft Maintenance Licence under the Malaysian Civil Aviation Regulations and related CAD 1: Personnel Licensing. It specifies legal consequences for non-compliance under Malaysia’s Civil Aviation Act and regulations. The directive also defines standards, recommended practices, appendices, definitions, tables/figures, notes and attachments, describes measurement units using SI, and includes editorial and revision-record practices for authorised personnel effective 1st May 2021.

LanguageEnglish

CategoryTechnology

FormatPDF

Pages102

Reading Time4 h 17 min

AccessFree to download

1 GENERAL

1.1 CITATION

1.2 APPLICABILITY

1.3 REVOCATION

1.4 DEFINITION

CIVIL AVIATION DIRECTIVE – 1801 AIRCRAFT MAINTENANCE LICENCE CAAM Part 66 CIVIL AVIATION AUTHORITY OF MALAYSIA ISSUE 01 REVISION 00 – 1 ST MAY 2021 INTENTIONALLY LEFT BLANK Introduction In exercise of the powers conferred by section 24O of the Civil Aviation Act 1969 (Act 3) , the Chief Executive Officer makes this Civil Aviation Directives (CAD) 1801 – Aircraft Maintenance Licence (CAAM Part 66), pursuant to Regulation 30, 35 , 189, 193 of the Malaysian Civil Aviation Regulations (MCAR) 2016. This CAD provides the requirement governing the issuance, renewal and variation of Aircraft Maintenance Licence and is compliant with Malaysian Civil Aviation Regulations and CAD 1 – Personnel Licensing, and in accordance with the Standards and Recommended Practices (SARPs) contained in the International Civil Aviation Organisation (ICAO) Annex 1 – Personnel Licensing. This Civil Aviation Directive 1801 – Aircraft Maintenance Licence (“CAD 1801 – Aircraft Maintenance Licence”) is published by the Chief Executive Officer under section 24O of the Civil Aviation Act 1969 (Act 3) and come into operation on 1st May 2021. Non-compliance with this CAD Any person who contravenes any provision in this CAD commits an offence and shall on conviction be liable to the punishments under section 24O of the Civil Aviation Act 1969 (Act 3) and/or under Malaysia Civil Aviation Regulation 2016. (Captain Chester Voo Chee Soon) Chief Executive Officer Civil Aviation Authority of Malaysia Civil Aviation Directive components and Editorial practices This Civil Aviation Directive is made up of the following components and are defined as follows: Standards: Usually preceded by words such as “shall” or “must”, are any specification for physical characteristics, configuration, performance, personnel or procedure, where uniform application is necessary for the safety or regularity of air navigation and to which Operators must conform. In the event of impossibility of compliance, notification to the CAAM is compulsory. Recommended Practices: Usually preceded by the words such as “should” or “may”, are any specification for physical characteristics, configuration, performance, personnel or procedure, where the uniform application is desirable in the interest of safety, regularity or efficiency of air navigation, and to which Operators will endeavour to conform. Appendices: Material grouped separately for convenience but forms part of the Standards and Recommended Practices stipulated by the CAAM. Definitions: Terms used in the Standards and Recommended Practices which are not selfexplanatory in that they do not have accepted dictionary meanings. A definition does not have an independent status but is an essential part of each Standard and Recommended Practice in which the term is used, since a change in the meaning of the term would affect the specification. Tables and Figures: These add to or illustrate a Standard or Recommended Practice and which are referred to therein, form part of the associated Standard or Recommended Practice and have the same status. Notes: Included in the text, where appropriate, Notes give factual information or references bearing on the Standards or Recommended Practices in question but not constituting part of the Standards or Recommended Practices; Attachments: Material supplementary to the Standards and Recommended Practices or included as a guide to their application. It is to be noted that some Standards in this Civil Aviation Directive incorporates, by reference, other specifications having the status of Recommended Practices. In such cases, the text of the Recommended Practice becomes part of the Standard. The units of measurement used in this document are in accordance with the International System of Units (SI) as specified in CAD 5. Where CAD 5 permits the use of non-SI alternative units, these are shown in parentheses following the basic units. Where two sets of units are quo

FAQs

What does CAD 1801 - Aircraft Maintenance Licence (CAAM Part 66) regulate?

It provides the requirements governing issuance, renewal, and variation of an Aircraft Maintenance Licence.

What are the consequences of not complying with this CAD?

Any person contravening provisions commits an offence and may be liable to punishments under the Civil Aviation Act 1969 and/or relevant Malaysia Civil Aviation Regulations 2016.

How are Standards and Recommended Practices defined in this directive?

Standards use wording such as “shall” or “must” and require uniform conformity, while Recommended Practices use “should” or “may” and are desirable for safety, regularity, or efficiency and operators will endeavour to conform.

Oct 1, 2026

Upload by asda1da