BV460 TRANSFER VELLUM FSC S2045NP-BG40BR

Oct 3, 2026

Uploaded by Levi

BV460 TRANSFER VELLUM FSC S2045NP-BG40BR datasheet details a white uncoated facestock made from FSC® Mix Credit paper, with specified basis weight and caliper, combined with a BG40 brown supercalendered glassine liner. It describes the permanent rubber-based adhesive S2045NP for pharmaceutical and healthcare use, including tack, peel adhesion, application and service temperatures, and performance on slightly rough or curved surfaces. It also covers thermal transfer labeling applications, conversion and printing guidance, compliance notes for food contact, cytotoxicity study results, DMF status, biobased content certification, shelf life storage conditions, and general warranty terms.

LanguageEnglish

CategoryHealthcare

FormatPDF

Pages2

Reading Time5 min

AccessFree to download

Facestock

Adhesive

Liner

Performance Data

Adhesive Performance

Applications and Use

Conversion and Printing

Compliance and Approvals

Cytotoxicity and Regulatory Status

Certification and Shelf Life

Warranty and Legal Notes

Facestock A white uncoated , surface-sized , supercalendered woodfree printing paper. The facestock is made from FSC® certified paper ( FSC Mix Credit , chain-of-custody number: CU-COC-807907 , Licence Code: FSC-C004451) Basis Weight 68 g/m² ISO 536 Caliper 66 µm ISO 534 Adhesive A special purpose permanent , rubber based adhesive for the pharmaceutical industry. Liner BG40 brown, supercalendered glassine paper. Basis Weight Caliper Laminate Total Caliper Performance Data Initial Tack Peel Adhesion 90° Min. Application Temp. Service Temperature 53 g/m² ISO 536 46 µm ISO 534 125 µm±10% ISO 534 21 N/25mm FTM 9 Glass 11 N/25mm FTM 2 St.St. 0 °C -40 °C to 70 °C Adhesive Performance S2045NP is a rubber based adhesive dedicated to the pharmaceutical and healthcare sector. Excellent tack and adhesion on a wide variety of surfaces, including slightly rough and curved. Particularly good performance at lower temperatures (around 5°C) . Limited mandrel performance around 10 mm. Applications and Use This white economical multipurpose paper provides good printresolution of picket fence barcodes and numeric data withthermal transfer print speed up to 150mm/sec. Main applications are logistics , inventory or warehouse inventory labeling on cardboard or paper substrates. Conversion and Printing This Thermal Transfer face material is developed and selected in close co-operation with leading Thermal Transfer printer and ribbon manufacturers. The print quality of the Thermal Transfer system depends on the correct match of Thermal Transfer ribbon , printer and printing surface , therefore it is strongly recommended to test in application before use. The smooth surface of this paper is specially suited for single and multicolour line or process printing in all the usual printing technologies. Offers very good print characteristics where a gloss surface finish is not required. Compliance and Approvals The adhesive S2045NP is suitable for contact with dry and moist, non-fatty foodstuffs in this construction. For complete information regarding the food contact compliance status , please contact your local sales representative for a Food Contact Statement. BV460 Fasson ® TRANSFER VELLUM FSCS2045NP-BG40 BR | TRANSFER VELLUM FSC | | | --- | --- | | S2045NP | | | --- | --- | | BG40BR | | | --- | --- | This is an automatically generated datasheet. All data to be considered as typical values and subject to change without prior notice. Further testing is always recommended. If you would like to make a suggestion or comment on this datasheet, please send an email [to datasheet.mgmt@eu.averydennison.com](to datasheet.mgmt@eu.averydennison.com) Spec Code: BV460 | EAN Code: 8712739526356 Issue Date: September-2026 The in-vitro cytotoxicity study, performed using mouse cell line L929 , showed that no leachable substances were released at cytotoxic concentrations from the test item as confirmed by two different endpoints (Reactivity grading, XTT assays) . S2045NP has a Drug Master File (DMF) submitted to the FDA. Letter of authorization can be issued on request. This adhesive is covered by the Avery Dennison pharma change management programme. Please contact our technical representative to receive more information about our compliance statements and additional services. Adhesive S2045NP has attained the two star certification for biobased content according to EN 16640 , meaning that S2045NP contains certified Biobased Carbon Content of at least 40% . (TÜV AUSTRIA licensee number: S0259) *The OK biobased certification is only applicable to the adhesive S2045NP. Shelf Life To obtain optimal performance, use this product within two years of the date of manufacture, under storage conditions as defined by FINAT (20-25°C; 40-50%RH) . Prolonged storage outside these conditions might reduce the shelf life. Avery Dennison Materials Group Europe Willem Einthovenstraat 11 2342 BH

FAQs

What are the key temperature limits and adhesion performance for adhesive S2045NP?

S2045NP uses an application temperature range down to 0 °C and a service temperature range of -40 °C to 70 °C. Tack and peel adhesion values are provided with FTM 9 and FTM 2 test conditions.

What labeling applications is this transfer vellum construction intended for?

It is intended for logistics, inventory, or warehouse labeling on cardboard or paper substrates, supporting thermal transfer printing of barcodes and numeric data at speeds up to 150 mm/sec.

Does the document provide safety or regulatory information for S2045NP?

Yes. An in-vitro cytotoxicity study using mouse L929 cells indicates no leachable substances at cytotoxic concentrations, and the adhesive has a Drug Master File (DMF) submitted to the FDA with authorization available on request.

Oct 3, 2026

Uploaded by Levi