BK-P14 - Pitco-Matic Filter System - L20-303 Rev 1 - Operations and Parts Manual

Oct 28, 2026

Upload by QWQ

Operations and Parts Manual for the BK-P14 Pitco-Matic Filter System (model L20-303, revision 1, 05/11). Provides purchaser/owner/store manager warnings, including safe installation, grounding, and prohibition of flammables nearby. Specifies qualified service requirements, warranty-void conditions for non-original or modified parts, and electrical power disconnection before servicing. Includes mobile-unit filtering instructions: frequency, filter while hot, step-by-step filter pan preparation with specified items, and key burn-avoidance precautions related to high-temperature shortening.

LanguageEnglish

CategoryHealthcare

FormatPDF

Pages8

Reading Time20 min

AccessFree to download

OPERATIONS and PARTS MANUAL

Warnings for installation, service and safe use

FILTERING INSTRUCTIONS - MOBILE UNITS

Mobile-unit filtering steps and pan preparation

IMPORTANT FOR FUTURE REFERENCE Please complete this information and retain this manual for the life ofthe equipment: Model \#: Serial \#: Date Purchased: OPERATIONS and PARTS MANUAL BK-P14 Pitco-Matic Filter System L20-303 Rev 1 (05/11) TO THE PURCHASER, OWNER AND STORE MANAGER Please review these warnings prior to posting them in a prominent location for reference. WARNING DO NOT store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. WARNING Improper installation, alteration, service or maintenance can cause property damage, injury or death. Read the installation, operating and maintenance instructions thoroughly before installing or servicing this appliance. WARNING Installation, maintenance and repairs should be performed by a Pitco Authorized Service and Parts (ASAP) company technician or other qualified personnel. Installation, maintenance or repairs by unauthorized and unqualified personnel will void the warranty. WARNING Installation and all connections must be made according to national and local regulations and codes in force. WARNING A country approved all pole circuit breaker with a minimum open contact gap of 3mm must be used for proper installation. (CE countries) WARNING During the warranty period if a customer elects to use anon-original part or modifies an original part purchased from Pitco and/or its Authorized Service and Parts (ASAP) companies, this warranty will be void. In addition, Pitco and its affiliates will not be liable for any claims, damages or expenses incurred by the customer which arises directly or indirectly, in whole or in part, due to the installation of any modified part and/or received from an unauthorized service center. WARNING This appliance, when installed, must be electrically grounded in accordance with local codes, or in the absence of local codes, with the National Electrical Code, ANSI/NFPA 70, or the Canadian Electrical Code, CSA C22.2, as applicable. WARNING DO NOT alter or remove structural material on the appliance to facilitate storage or for any other reason. WARNING This appliance is intended for professional use only and should be operated by fully trained and qualified personnel. WARNING DO NOT use the electrical cord as a leash to move the appliance. Series injury and appliance damage can occur. WARNING If the supplied power cord or receptacle is damaged, it must be replaced by a Pitco Authorized Service and Parts (ASAP) company technician, or a similarly qualified person in order to avoid a hazard. WARNING The power supply must be disconnected before servicing, maintaining or cleaning this appliance. WARNING The appliance is NOT jet stream approved. DO NOT clean the appliance with a water jet. WARNING DO NOT attempt to move this appliance or transfer hot liquids from one container to another when the unit is at operating temperature or filled with hot liquids. Serious personal injury could result if skin comes in contact with the hot surfaces or liquids. WARNING DO NOT sit or stand on this appliance. The appliance’stop panel, filter pan, filter carriage, pan cover is not a step. Serious injury could result from slipping, falling or contact with hot liquids. WARNING NEVER use the appliance as a step for cleaning or accessing the ventilation hood. Serious injury could result from slips, trips or from contacting hot liquids. WARNING The filter pan should be dry and free of water droplets prior to use. Serious injury could result from hot steam vapors when hot oil/shortening mixes with water. WARNING DO NOT overfill filter pan with hot oil/shortening. Do not leave appliance unattended while draining or refilling with oil/shortening. Over filling the appliance can cause serious injuries and damage the appliance. WARNING The contents of the crumb catch and/or filter pan of any filter system must be emptied into a fireproof conta

FAQs

What safety warnings apply before installing or servicing the Pitco-Matic Filter System?

Installation, alteration, service, and maintenance must follow national and local regulations and be performed by qualified Pitco Authorized Service and Parts (ASAP) technicians. The power supply must be disconnected before servicing, maintaining, or cleaning.

How does using non-original or modified parts affect the warranty?

During the warranty period, using a non-original part or modifying an original part purchased from Pitco and its Authorized Service and Parts (ASAP) companies voids the warranty.

What are the key steps for filtering using the mobile units?

Filter the fryer twice daily for best results while the oil is hot. Turn the fryer off before draining and filtering, pull the filter pan out on the carriage slide, and prepare the pan by placing the paper support rack, new paper, and paper retainer rack as instructed.

Oct 28, 2026

Upload by QWQ