AUTOMATIC DRIVING LICENSE TEST USING LABVIEW - Automatic Driving License Test Using LabVIEW

Sep 18, 2026

The paper presents an automated driving license testing system using LabVIEW integrated with IR sensors and an RFID module. It replaces manual oversight in which examiners watch candidates along an ‘H’ track and reduces human errors such as observation bias and favouritism. Candidates are checked against RFID-tag identity, monitored by sensors during the maneuver, and automatically selected or rejected based on driving performance.

LanguageEnglish

CategoryExam

FormatPDF

Pages3

Reading Time8 min

AccessFree to download

Abstract

I. Introduction

II. Related Literature

A. Block Diagram

c) RFID Module

© 2017 IJRTI | Volume 2, Issue 5 | ISSN: 2456-3315 AUTOMATIC DRIVING LICENSE TEST USING LABVIEW 1J Chandra shekar, 2K Dinesh, 3P Yugala, 4CH Kalyani Dept. of Electronics and Communication Engineering, MLR Institute of Technology Hyderabad, India Abstract—This paper presents about the automation of driving license test system. Normally, in driving test a candidate applied for the license have to drive over a closed loop path in front of the authorities. For that, the authorities watch candidate manually. In this project, a LabVIEW with sensors and RFID module has been developed for watching the candidate for getting a license by using Lab VIEW. By using this, the candidate who fails to drive vehicle in ‘H’track is monitored. The purpose of this project is to develop a system for improving the standards of license issuing mechanism presently followed in order to provide road safety to reduce bad driving habits as well as corruption. In the present test process, the examiner must be on the field during the test. This includes a dedicated officer like the regional transport officer (RTO) himself fixing his stare at many numbers of test takers undertaking their license test. This, in fact, leads to common human errors like observation, favouritism and corruption. Presently the movements of a light motor vehicle like a car, jeep are guided along an ‘H’ track. The test tracker has to move his vehicle along the ‘H’ track in order to complete his driving test. One or more inspectors from the motor vehicles department have to stay long hours in the field wasting alot of man-hours. A real good test taker cannot be accurately found from the existing driving licence test. The proposed technological solution of existing manual test process enables the elimination of human intervention and improves the driving test accuracy while going paperless with the driving skill evaluation system. As a contribution to the society, this technological solution can reduce the number of road accidents because most accidents result from a lack of planning, anticipation and control which are highly dependent on driving skill. This system is aimed at phasing out the current manual test procedure with help of IR sensors and RFID module and also by using Lab VIEW software it should be monitored and data stored without the help of authorities. So that it will automatically select or reject the system. Keywords—LabVIEW; Sensors; Driving licence; RFID Module I. INTRODUCTION According to the study conducted by International Finance Corporation(IFC), the process of obtaining the driving licence in India is a distorted bureaucratic one. In recent days life technology has been developed and people are interested in doing a shortcut. The growing technology introduces many advances in the day to day life. It reduces the manpower and time consumption. The study conducted by IFC also highlights the complex nature of corruption that exists in the process of issuing driving licences. Hence we can say that corruption in obtaining a driver‟s licence can be minimised to a very large extent by developing an automated system which eliminates tampering of a driving test results and this project also helps to get a driving licence for the candidate without any authorities. In existing system consists of many photo sensors are used in „H‟ track. So, there may be a chance of signal interruption. In this project, only IR sensors are used in „H‟ track. So, the signal interruption is less and also authority person need not monitor the candidate who enters for the driving licence test. Before entering for driving licence test normally LLR is applied for training and experience. It‟s not needed in this project. If the candidate knows the driving well then the candidate can register by filling form then they will give tag for him and at the time of the licence, test candidate should bring that tag. If it matches then only he will be allowed for driving licence te

FAQs

How does the proposed system verify candidate eligibility for the driving test?

Candidates receive an RFID tag at registration, and the RFID module is used to allow only registered candidates to enter the driving test.

What role do IR sensors play in the ‘H’ track test?

IR sensors detect the vehicle’s movement along the ‘H’ track and monitor the candidate’s driving during the test.

How does the system reduce issues found in the current manual test process?

By eliminating continuous human intervention, it reduces observation-related errors, lowers opportunities for corruption, and improves driving test accuracy with stored evaluation data.

Sep 18, 2026

Uploaded by Felix Montgomery