AMERICAN ENVIRONMENTAL SOLUTIONS, INC. - REMEDIAL INVESTIGATION WORK PLAN - VOLUNTARY CLEANUP AGREEMENT

Oct 4, 2026

Upload by dbqoiu

Remedial Investigation Work Plan for the National Rubber Adhesives, Inc. site under a voluntary cleanup agreement, prepared by American Environmental Solutions, Inc. for Corastor Holding Company, Inc. and Hamil Stratten Properties, LLC. The plan outlines purpose and scope for Phase II environmental site assessment, including investigation objectives, site description, and site geology/hydrogeology, plus prior investigation summaries. It also details work scope, staffing and management, project schedule, and a Quality Assurance Project Plan covering sampling procedures, sample custody, data validation, internal quality control, audits, and corrective action. Figures and appendices support laboratory qualifications and B.A.E.S qualifications.

LanguageEnglish

CategoryResearch & Report

FormatPDF

Pages179

Reading Time7 h 31 min

AccessFree to download

1.0 PURPOSE AND SCOPE

1.1 Introduction

1.2 Investigation Objectives

1.3 Site Description

1.4 Site Geology/Hydrogeology

2.0 PREVIOUS SITE INVESTIGATIONS

3.0 SCOPE OF WORK

4.0 PROJECT STAFFING & MANAGEMENT

5.0 PROJECT SCHEDULE

6.0 QUALITY ASSURANCE PROJECT PLAN (QAPP)

6.1 Project Description

6.2 Project Organization & Responsibilities

6.3 QA Objectives

6.4 Laboratory Qualifications

6.5 Sampling Procedures

6.6 Sample Custody

6.7 Data Reduction, Validation & Record Keeping

6.8 Internal Quality Control, Performance, & System Audits

6.9 Corrective Action

FIGURES

APPENDICES

# TC AMERICAN ENVIRONMENTAL SOLUTIONS,INC. REMEDIAL INVESTIGATION WORK PLAN VOLUNTARY CLEANUP AGREEMENTNATIONAL RUBBER ADHESIVES,INC.NYSDEC INDEX NO.W2-0967-03-07AES PROJECT NO.:0060 PREPARED FOR: CORASTOR HOLDING COMPANY,INC./HAMIL STRATTEN PROPERTIES,LLC25-09 BROADWAYASTORIA,NEW YORK11106 REVISEDFEBRUARY 2005 PREPARED BY: AMERICAN ENVIRONMENTAL SOLUTIONS,INC.100 CARLETON AVENUECENTRAL ISLIP,NEW YORK11772 SUBMITTED TO: MR.JOSEPH PECK DIVISION OF ENVIRONMENTAL REMEDIATION NEW YORK STATE DEPARTMENT OF ENVIRONMENTAL CONSERVATION625 BROADWAYALBANY,NEW YORK 12233 # AMERICAN ENVIRONMENTAL SOLUTIONS,INC. REMEDIAL INVESTIGATION WORK PLAN VOLUNTARY CLEANUP AGREEMENTNATIONAL RUBBER ADHESIVES,INC.NYSDEC INDEXNO.W2-0967-03-07AES PROJECT NO.:0060 PREPARED FOR: CORASTOR HOLDING COMPANY,INC./HAMIL STRATTEN PROPERTIES,LLC25-09 BROADWAYASTORIA,NEW YORK11106 REVISEDFEBRUARY 2005 PREPARED BY: AMRICAN ENVIRONMENTAL SOLUTIONS,INC.100 CARLETON AVENUECENTRAL ISLIP,NEWYORK11772 SUBMITTED TO: MR.JOSEPH PECK DIVISION OF ENVIRONMENTAL REMEDIATION NEW YORK STATE DEPARTMENT OF ENVIRONMENTAL CONSERVATION625 BROADWAYALBANY,NEW YORK 12233 TABLE OF CONTENTS 1.0 PURPOSE AND SCOP……………………………………………………………………………………………………………………………1 1.1 Introduction …………………………………………………………………………………………………………………………………………………1 1.2 Investigation Objectives……………………………………………………………………………………………………………………………………2 1.3 Site Description……………………………………………………………………………………………………………………………………………………2 1.4 Site Geology/Hydrogeology……………………………………………………………………………………………………………………………3 2.0 PREVIOUS SITE INVESTIGATIONS…………………………………………………………………………………………………4 3.0 SCOPE OF WORK……………………………………………………………………………………………………………………………………5 4.0 PROJECT STAFFING &MANAGEMENT…………………………………………………………………………………………9 5.0 PROJECT SCHEDULE………………………………………………………………………………………………………………………………………9 6.0 QUALITY ASSURANCE PROJECT PLAN (QAPP)…………………………………………………………9 6.1 Project Description…………………………………………………………………………………………………………………………………………9 6.2 Project Organization& Responsibilities …………………………………………………………………………………………………………9 6.3 QA Objectives……………………………………………………………………………………………………………………………………………………10 6.4 Laboratory Qualifications………………………………………………………………………………………………………………………………12 6.5 Sampling Procedures………………………………………………………………………………………………………………………………………12 6.6 Sample Custody………………………………………………………………………………………………………………………………………………13 6.7 Data Reduction,Validation & Record Keeping………………………………………………………………………………………13 6.8 Internal Quality Control, Performance, & System Audits……………………………………………………………………………………………………………………………………………………14 6.9 Corrective Action……………………………………………………………………………………………………………………………………………14 FIGURES Figure 1 Site Location Map Figure 2 Site Schematic w/Sampling Locations Figure 3 Proposed Well/Soil Gas Locations Figure 4 Sample Well Construction APPENDICES Appendix A Laboratory Statement of Qualifications Appendix BAES Qualifications 1.0 PURPOSE AND SCOPE 1.1 Introduction American Environmental Solutions Inc.(AES)has prepared this Phase II Remedial InvestigationWork Plan for the National Rubber Adhesives,Inc.Site(the site)located at 38-319ᵗh Street,LongIsland City,Queens,New York.The site consists of a 30,000 square foot one story building,which has been the site of adhesives manufacturing for approximately 62 years.Currently thesite is used as a storage warehouse and no manufacturing takes place on the property.Future siteuses will be an automotive repair shop,a marble fabrication shop and a warehouse/carpentryshop.Previous operations at the site include the manufacture of latex and solvent based adhesiveproducts.Hazardous materials including heptane and chloroform were formerly used and storedon-site.Five underground storage tanks(USTs)were closed in-place,including one toluene(1500 gals.),one gasoline(550 gals.),one ethyl acetate(550 gals.),one methyl ethyl ketone(MEK)(1500 gals.)and one heptane(1500 gals.).In addition,a sub-surface investi

FAQs

What is the purpose of this Remedial Investigation Work Plan?

It provides a detailed description of the Phase II tasks to be completed to conduct an environmental site assessment and address any Interim Remedial Measures (IRMs) considered appropriate based on existing data.

What contamination history and site operations are described?

The plan describes historic adhesives manufacturing, prior use of hazardous materials, closed underground storage tanks, above-ground tanks, and prior voluntary investigation findings indicating soil and groundwater contamination with VOCs.

What does the Quality Assurance Project Plan (QAPP) include?

The QAPP section covers project description and organization, QA objectives, laboratory qualifications, sampling procedures and sample custody, data reduction/validation/record keeping, internal quality control with performance and system audits, and corrective action.

Oct 4, 2026

Upload by dbqoiu