AEROGREEN 4110 Paint Prep - Pre Paint Cleaner - Surface Preparation and Cleaning

Sep 27, 2026

Uploaded by Hazel

AEROGREEN 4110 Paint Prep is a solvent-type drop-in cleaner for preparing metal surfaces before coating. It removes oils, dirt, grease, waxes, polishing compounds, salts, soluble oils, and other contaminants to improve adhesion. Use it as a pre-paint cleaner, between primer and top coat, and for final customer-ready cleaning. The product is a water-diluted concentrate (3:1), leaving no residue and requiring no rinsing.

LanguageEnglish

CategoryHealthcare

FormatPDF

Pages2

Reading Time5 min

AccessFree to download

Product Information

Solvent Wipe-On, Wipe-Off Cleaning

Before and After Sand Blasting

Technical Information

Features and Benefits

Application Guidelines

Specifications

Safety/Caution

Compatibility

Product Information AEROGREEN 4110 PAINT PREP AEROGREEN 4110 PAINT PREP The most common method of surface preparation is solvent wipe-on, wipe-oﬀ . AEROGREEN 4110 Paint Prep is a direct drop in replacement for solvent type cleaners such as Lacquer thinner, MIBK, MEK, IPA, Acetone and other hazardous high VOC solvents. AEROGREEN 4110 PAINT PREP is the best way of cleaning metal of oils, dirt, grease, waxes, polishing compounds, salts, soluble oils, drilling and cutting compounds and other surface contaminants that will prevent the coa􀆟ngs from adhering to metal surfaces as outlined in SSPC-SPI Interna􀆟onal Standards. AEROGREEN 4110 Paint Prep is a pre paint cleaner prior to coa􀆟ng, inbetween primer and top coat, and as a ﬁnal clean to make items customer ready. AEROGREEN 4110 PAINT PREP The quality of the surface preparation has a direct rela􀆟onship with the ﬁnal surface coa􀆟ngsand therefore it cannot be emphasized enough that for good and permanent adhesion. The use of AEROGREEN 4110 Paint Prep will ensure a superior surface prepara􀆟on for all types of liquid and powder ﬁnishes. Before and After Sand Blasting For General Industrial For: General Industrial, Automotive, and Architectural job shops and manufacturers. For Ferrous and Non Ferrous substrates including: • Aluminum • Cast Iron • Chrome • Cold Roll • Copper • Composites • Fiberglass • Galvanized • Mild Steel • Painted Wood • Titanium • Tin • Tool Steel • Stainless Steel For Transportation For Automotive For Powder Coating For Window and Door composites Technical Information Aerogreen Product Number 4110GT-12 (Case 12-32 oz Containers) 4110G4 (Case 4-1 Gal Containers) 4110P-5-Gallon Pail 4110D-55-Gallon Drum 4110T275-275 Gallon Tote 4110T330-330 Gallon Tote AEROGREEN 4110 Paint Prep is a liquid concentrate to be diluted with water primarily at the rate of three parts water to one part cleaner: Features: • Compatible with all paints Water Reducible • Ease of Application • Can be used for final customer prep • Direct drop in replacement for solvents Benefits: • No rinsing • Leave no residue • Low VOC's • Promotes adhesion • Dispose used rags into trash Application guidelines: For all wipe-on wipe-off process prior to paint. Dip a clean, lint free cloth into Aerogreen 4110 Paint Prep diluted 3:1 with water. Wring the cloth out so that it is saturated, but not dripping. Wipe a small area at a time to remove dirt and oils and contaminates. Wipe the same area dry with a clean, dry cloth to remove all the contaminates and insure the surface is dry and ready for paint For use in pump sprayer. Dilute Aerogreen 4110 Paint Prep 3:1 with water. Spray parts to be cleaned. Remove loosened soils by wiping with the surface with a clean, dry cloth to remove all the contaminates and insure the surface is dry and ready for paint. For customer final prep-prior to shipping-dilute Aerogreen 4110 Paint Prep 3:1 with water and use the directions above for wipe-on wipe-off to clean to clean freshly painted surface, after all components are assembled onto the item and the item is ready to ship to the customer. Aerogreen 4110 Paint Prep will not de-gloss the freshly painted surface. Specifications: • Readily Biodegradability Yes • Flammable-Combustible No • SCAQMD Certﬁed Yes • Contains Terpenes No • Caustics No • pH @ Concentrate 12.0-12.3 • pH @ 1-3 dilution 10.0-11.0 • Density lbs./per gal 8.9 Lbs./per gal • Color/Characteristic Green/Liquid Safety/Caution: Rubber gloves are recommended to prevent drying of the skin. Goggles are recommended to protect eyes if splashing is expected. When using in dip tanks heated above 125 F, mechanical or local ven􀆫la􀆫on is required. When using product in steam cleaning and/or pressure washing applications, wear a protective suit and boots to keep clothes dry. Harmful if swallowed. Avoid ge􀆩ng into eyes. If contact occurs, ﬂush with running water.

FAQs

What does AEROGREEN 4110 Paint Prep remove from surfaces?

It cleans metal of oils, dirt, grease, waxes, polishing compounds, salts, soluble oils, and drilling/cutting compounds to prevent coating adhesion failures.

How should AEROGREEN 4110 Paint Prep be diluted for use?

Dilute with water at a 3:1 ratio (three parts water to one part cleaner) for wipe-on/wipe-off, pump sprayer, and final prep.

What safety precautions are recommended when using the cleaner?

Wear rubber gloves and goggles to prevent skin drying and protect eyes from splashing. Use ventilation for dip tanks heated above 125°F and wear a protective suit and boots for steam cleaning or pressure washing.

Sep 27, 2026

Uploaded by Hazel