7-1/4" (184 mm) Circular Saws DWE574

Oct 23, 2026

Uploaded by Damian

Safety alert symbols and hazard word definitions outline DANGER, WARNING, CAUTION, and NOTICE meanings, along with pictorial references. The manual issues general power tool safety warnings covering work area, electrical safety, personal safety, and tool use and care. It emphasizes reading all warnings and instructions, reducing injury risk, and contacting DEWALT toll free for questions. It also lists key saw parts shown in the figure.

LanguageEnglish

CategoryHealthcare

FormatPDF

Pages13

Reading Time33 min

AccessFree to download

Safety Alert Symbols and Words

General Power Tool Safety Warnings

Work Area Safety

Electrical Safety

Personal Safety

Power Tool Use and Care

Instruction Manual Guide D’utilisation Manual de instrucciones DWE574, DWE575, DWE575SB 7-1/4" (184 mm) Circular Saws Scie circulaire de 184 mm (7-1/4 po) Sierra Circular de 184 mm (7-1/4") If you have questions or comments, contact us. Pour toute question ou tout commentaire, nous contacter. Si tiene dudas o comentarios, contáctenos. 1-800-4-DEWALT | English (original instructions) | 1 | | --- | --- | | Français (traduction de la notice d’instructions originale) | 13 | | Español (traducido de las instrucciones originales) | 26 | Definitions: Safety Alert Symbols and Words This instruction manual uses the following safety alert symbols and words to alert you to hazardous situations and your risk of personal injury or property damage. DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.(Used without word) Indicates a safety related message. NOTICE: Indicates a practice not related to personal injury which, if not avoided, may result in property damage. Fig. A 1 12 11 10 9 1 Trigger switch 2 Main handle 3 Blade lock 4 End cap 5 Auxiliary handle 6 Bevel adjustment lever 7 Bevel angle adjustment 8 Foot plate 9 Lower blade guard 10 Blade clamping screw 11 Lower guard lever 12 Upper blade guard 2 3 4 5 6 7 8 WARNING: Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. WARNING: To reduce the risk of injury, read the instruction manual. If you have any questions or comments about this or any product, call DEWALT toll free at:(1-800-433-9258). 7-1/4" (184 mm) Circular Saws DWE574 GENERAL POWER TOOL SAFETY WARNINGS WARNING: Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. SAVE ALL WARNINGSAND INSTRUCTIONS FOR FUTURE REFERENCE. The term “power tool”in the warnings refers to your mainsoperated (corded) power tool or battery-operated (cordless) power tool. 1) Work Area Safety a ) Keep work area clean and well lit. Cluttered or dark areas invite accidents. b ) Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes. c ) Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control. 2) Electrical Safety a ) Power tool plugs must match the outlet. Never modify the plugin any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock. b ) Avoid body contact with earthed orgrounded surfaces, such as pipes, radiators, ranges and refrigerators. There is an increased risk ofelectric shock if your body is earthed orgrounded. c ) Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock. d ) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock. e ) When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock. f) If operating a power tool in a damp location is unavoidable, use a ground fault circuit interrupter (GFCI) protected supply. Use of a GFCI reduces the risk of electric shock. 3) Personal Safety a ) Stay alert, watch wh

FAQs

What do DANGER, WARNING, CAUTION, and NOTICE mean in this manual?

DANGER indicates an imminently hazardous situation that will result in death or serious injury if not avoided. WARNING indicates a potentially hazardous situation that could result in death or serious injury. CAUTION indicates minor or moderate injury. NOTICE indicates practices not related to personal injury that may result in property damage.

What should you do to reduce the risk of injury before using the circular saw?

Read all safety warnings and instructions, and review the instruction manual. Follow the safety guidance throughout the manual to reduce the risk of electric shock, fire, and serious injury.

What electrical safety practices are required for operating power tools?

Use matching outlet plugs without modification, avoid contact with grounded surfaces, do not expose tools to rain or wet conditions, manage cords safely, and use an appropriate extension cord outdoors. If operating in a damp location is unavoidable, use a GFCI-protected supply.

Oct 23, 2026

Uploaded by Damian