3342 Instruction Manual - Important Safety Instructions - DANGER - WARNING

Oct 22, 2026

Upload by Finn

3342 sewing machine instruction manual provides essential safety precautions for household users before operating and performing any cleaning or servicing. It highlights risks of electric shock and injury, requiring immediate unplugging after use, safe handling around moving parts and the needle, and correct needle plate and threading adjustments. It also specifies restrictions on operation conditions, ventilation, and avoiding wet use, plus guidance for replacing damaged LED lamps or cords. It concludes with double-insulation servicing information and region-specific user instructions.

LanguageEnglish

CategoryTechnology

FormatPDF

Pages36

Reading Time1 h 31 min

AccessFree to download

IMPORTANT SAFETY INSTRUCTIONS

DANGER - To reduce the risk of electric shock

WARNING - To reduce the risk of burns, fire, electric shock, or injury to person

SAVE THESE INSTRUCTIONS

SERVICING OF DOUBLE INSULATED PRODUCTS

3342 Instruction Manual IMPORTANT SAFETY INSTRUCTIONS This household sewing machine is designed to comply with IEC/EN 60335-2-28 and UL1594 . IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic safety precautions should always be followed, includingthe following: Read all instructions before using this household sewing machine. Keep the instructions in a suitable place close to the machine. Make sure to hand them over if the machine is given to a third party. DANGER -To reduce the risk of electric shock : - A sewing machine should never be left unattended when plugged in. Always unplug this sewing machine from the electric outlet immediately after using and before cleaning, removing covers, lubricating or when making any other user servicing adjustments mentioned in the instruction manual. WARNING -To reduce the risk of burns, fire, electric shock, or injury to person : - Do not allow to be used as a toy. Close attention is necessary when this sewing machine is used by or near children. - Use this sewing machine only for its intended use as described in this manual. Use only attachments recommended by the manufacturer as contained in this manual. - Never operate this sewing machine if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or dropped into water. Return the sewing machine to the nearest authorized dealer or service center for examination, repair, electrical or mechanical adjustment. - Never operate the sewing machine with any air openings blocked. Keep ventilation openings of the sewing machine and foot control free from the accumulation of lint, dust, and loose cloth. - Keep fingers away from all moving parts. Special care is required around the sewing machine needle. - Always use the proper needle plate. The wrong plate can cause the needle to break. - Do not use bent needles. - Do not pull or push fabric while stitching. It may deflect the needle causing it to break. - Wear safety glasses. - Switch the sewing machine off (“O”) when making any adjustment in the needle area, such as threading needle, changing needle, threading bobbin, or changing presser foot, etc. - Never drop or insert any object into any opening. - Do not use outdoors. - Do not operate where aerosol (spray) products are being used or where oxygen is being administrated. - To disconnect, turn all controls to the off (“O”) position, then remove plug from outlet. - Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord. - The foot control is used to operate the machine. Avoid placing other objects on the foot control. - Do not use the machine if it is wet. - If the LED lamp is damaged or broken, it must be replaced by the manufacturer or its service agent or a similarly qualified person, in order to avoid a hazard. - If the supply cord connected with the foot control is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person, in order to avoid a hazard. - This sewing machine is provided with double insulation. Use only identical replacement parts. See instructions for Servicing of Double-Insulated Appliances. SAVE THESE INSTRUCTIONS For Europe only : This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision. The noise level under normal operating conditions is less than 75dB(A) . The machine must only be used with foot control of type KD-1902, FC-1902 (110-120V area) / KD- 2902, FC-2902A, FC-2902C, FC-2902D (220-240V area) manufactured by ZHEJIANG FOUNDER MOTOR CORPORATION LTD. (China) / 4C-

FAQs

What should be done after using the sewing machine before cleaning or adjustments?

Unplug the sewing machine from the electric outlet immediately after using and before cleaning, removing covers, lubricating, or making any other user servicing adjustments mentioned in the manual.

What are the key warnings related to needle area and moving parts?

Keep fingers away from all moving parts and use special care around the sewing machine needle. Switch the machine off (“O”) when making any adjustment in the needle area, such as threading or changing the needle and presser foot.

How must double-insulated products be serviced and what parts should be used?

Servicing requires extreme care and knowledge and should be done only by qualified service personnel. Replacement parts must be identical to the parts in the product, and the product is marked with “DOUBLE INSULATION” or “DOUBLE INSULATED”.

Oct 22, 2026

Upload by Finn