13 24 16 - SAUNAS - PART 1 - GENERAL - SECTION 13 24 16

Oct 24, 2026

Uploaded by Patrick

SECTION 13 24 16 specifies custom-cut sauna rooms, including required manufacturers, permitted substitutions, and the full scope of sauna components and related work coordination. It defines section contents (sauna enclosures, heaters, accessories), outlines submittals such as product data, shop drawings, and verification samples, and sets delivery, storage, and handling requirements. Product details cover custom wall/ceiling boards, doors, heater models and electrical ratings, SaunaLogic controls, benches, floor finish, heater guard rails, and accessory options, including sauna components for pre-cut installations.

LanguageEnglish

CategoryHealthcare

FormatPDF

Pages32

Reading Time1 h 21 min

AccessFree to download

SECTION 13 24 16 - SAUNAS

PART 1 - GENERAL

PART 2 - PRODUCTS

13 24 16 SECTION 13 24 16 – SAUNAS PART 1 GENERAL Sauna rooms shall be as manufactured by Helo Commercial of Cokato, MN. Substitutions ofthe products of other manufacturers will be considered only if a bid is received and will be entered as a proposed substitute for the product specified. All work set forth below will be included unless the drawings indicate N.I.C. (Not In Contract) or unless listed below as “related work in other sections.” 1.1 SECTION INCLUDES A. Custom Cut Saunas. B. Sauna Heaters. C. Sauna Accessories. 1.2 RELATED SECTIONS A. Section 03300 – Cast-In-Place Concrete: Floor Construction. B. Section 06100 – Rough Carpentry: Wall and Ceiling framing. C. Section 07210 – Building Insulation: Insulation of walls and ceiling. D. Section 15145 – Plumbing Piping: Floor drains. E. Section 16155 – Equipment Wiring: Connections to building electrical service. 1.3 SUBMITTALS A. Submit under provisions of Section 01300 . B. Product Data: Manufacturer’s descriptive literature for saunas and components specified, including installation instructions and recommendations. C. Shop Drawings: Indicate room layout, equipment locations, details of assembly and anchorage, and rough-in locations. D. Verification Samples: Two samples, minimum size 6 inches (150 mm) square, accurately representing appearance of wall panels. E. Operation and Maintenance Data: Sauna enclosure, heater, and controls. 1.4 DELIVERY, STORAGE, AND HANDLING A. Store sauna products in manufacturer’s unopened packaging, in dry, heated storage area until installation. 1.5 WARRANTY A. See Section 01780 – Closeout Submittals, for additional warranty requirements. B. Residential Warranty: Provide manufacturer’s five-year limited warranty against splitting and shrinking of wood materials and five-year limited warranty against defects in materials and workmanship for sauna heaters. 13 24 16 PART 2 PRODUCTS 2.1 MANUFACTURERS A. Acceptable Manufacturer: Helo Commercial, 575 E. Cokato St, Cokato, MN 55321. ASD. TEL: (800) 225-7519 Fax: (320) 286-6100 . B. Substitutions: Not permitted. C. Requests for substitutions will be considered in accordance with provisions of Section 01600 . 2.2 SAUNA COMPONENTS A. Custom-Cut Sauna: Helo Commercial custom-cut wall and ceiling finish for installation on framed walls, dimensioned as indicated on drawings, with wall and ceiling finish as follows; 1. 1 x 4 (25 x 100 mm) V-joint T&G boards. 2. Species: Clear Western Red Cedar, kiln-dried to 12 percent maximum moisture content. 3. Lengths: As required to eliminate butt joints, with boards installed vertically if horizontal length of wall is over 96 inches (2440 mm) . B. Door: Standard type as described below, including handles, casing, and jambs, and three brass hinges with a ball catch. Optional: Self-closing hinges. 1. Residential Door: Pre-hung door with vertical grain Douglas Fir railsand sealed, tempered, double pane window. a. Mahogany jambs. b. Dimensions: 24 x 80 x 1-3/4 inches (610 x 2032 x 44.5 mm) . c. Dimensions: 30 x 80 x 1-3/4 inches (762 x 2032 x 44.5 mm) . d. Dimensions: 36 x 80 x 1-3/4 inches (915 x 2032 x 44.5 mm) . e. Dimensions: 24 x 72 x 1-3/4 inches (610 x 1830 x 44.5 mm) . 2. Residential Door: Pre-hung all-glass door with bronze tinted glass (no wood on door itself) . a. 2x Western Red Cedar jambs b. Dimensions: 24 x 80 x 5/16 inches (610 x 2032 x 8 mm) . c. Dimensions: 36 x 80 x 5/16 inches (915 x 2032 x 8 mm) . d. Dimensions: 24 x 72 x 5/16 inches (610 x 1830 x 8 mm) . C. Sauna Heater: 1. Wall-Mounted Heaters: a. Model as recommended by manufacturer for sauna volume. b. Junior; 2.1 kW. 17.5 amps, 120 volts, SaunaLogic controls, for saunas from 45 to 100 cubic feet (1.25 to 2.8 cubic m) c. Junior; 3.0 kW, 25 amps, 120 volts, SaunaLogic controls, for saunas up to 150 cubic feet (4.2 cubic m) . d. Junior; 3.0 kW, 12.5 amps, 240 volts, SaunaLogic controls, for

FAQs

What is included in Section 13 24 16 for sauna rooms?

The section covers custom-cut saunas, sauna heaters, and sauna accessories, along with coordination with related concrete, carpentry, insulation, plumbing, and wiring sections.

Which sauna components and materials are specified for the custom-cut enclosure?

It specifies wall and ceiling finish using 1 x 4 V-joint T&G boards in clear Western Red Cedar, kiln-dried to a maximum moisture content of 12%, with installation details to eliminate butt joints.

What heater controls and electrical configurations are provided?

SaunaLogic controls are specified for Junior and Viki heaters with programmable time and temperature and lighting controls; heater options include 2.1 kW (120V) and 3.0 kW configurations at 120V or 240V sized to defined sauna volumes.

Oct 24, 2026

Uploaded by Patrick